[AudioI] New Stereo - no sound

[Jonathan Markevich]

Yeah I gave it a very quick look but I boxed it up already for return/replacement.

Here’s hoping the next one is (almost) plug and play!
> Hi,
> 
> Ah OK, I miss that your board is the Stereo.   I'm not quite firing on 
> all cylinders since having just recovered from Covid. So yes, again it 
> does look like you may have defective unit. However, you probably have, 
> but did you check all the solder connections on the header?
> 
> 73,
> Ron / W4MMP
> 
> On 1/31/2021 00:47, Jonathan Markevich via People wrote:
> > Could be, I did no soldering on this though - as it's the Stereo, not
> > the Zero.
> >
> > Eh I can see how it can happen.  I decided to order a replacement.  I
> > did look at some other boards but this one is still pretty compelling
> > for me.
> >
> > Thanks for your help.
> >
> >> Perhaps so.
> >>
> >> There are two resistor very very close to the header pins. If too much heat is applied when soldering the header pins, it is easy for one or both of these resistors to come off the Zero. I had it happen to me once.
> >>
> >> 73,
> >>
> >> Ron / W4MMP
> >>
> >> On 1/31/2021 00:24, Jonathan Markevich via People wrote:
> >>
> >>> Well, sadly I found this page:
> >>> http://forum.audioinjector.net/viewtopic.php@t=321.html <http://forum.audioinjector.net/viewtopic.php@t=321.html>
> >>> And it sounds pretty much exactly like my experience, except with newer
> >>> OS software, that is.
> >>>
> >>> I think I may have a damaged board, unfortunately.  I did order through
> >>> Amazon so I can probably return it and order another... oh well.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.audioinjector.net/pipermail/people/attachments/20210201/7cf3aef1/attachment.htm>