[AudioI] New Stereo - no sound

[Ron Patton]

Perhaps so.

There are two resistor very very close to the header pins. If too much heat is applied when soldering the header pins, it is easy for one or both of these resistors to come off the Zero. I had it happen to me once.

73,

Ron / W4MMP

On 1/31/2021 00:24, Jonathan Markevich via People wrote:

> Well, sadly I found this page:
> http://forum.audioinjector.net/viewtopic.php@t=321.html
> And it sounds pretty much exactly like my experience, except with newer
> OS software, that is.
>
> I think I may have a damaged board, unfortunately.  I did order through
> Amazon so I can probably return it and order another... oh well.
>
> --
> People mailing list
> People at lists.audioinjector.net
>
> https://lists.audioinjector.net/mailman/listinfo/people
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.audioinjector.net/pipermail/people/attachments/20210131/636b6137/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: glkooekndiepibgj.jpg
Type: image/jpeg
Size: 118405 bytes
Desc: not available
URL: <https://lists.audioinjector.net/pipermail/people/attachments/20210131/636b6137/attachment-0001.jpg>