[AudioI] AudioInjector Zero no longer being recognized by raspberrypi 4 (Tony Henrie)
Tony Henrie
tthenrie at yahoo.com
Sat Mar 20 23:22:01 UTC 2021
Oops! Forgot to rename the subject line. See my reply below.
> On Mar 20, 2021, at 5:18 PM, people-request at lists.audioinjector.net wrote:
>
> Send People mailing list submissions to
> people at lists.audioinjector.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.audioinjector.net/mailman/listinfo/people
> or, via email, send a message with subject or body 'help' to
> people-request at lists.audioinjector.net
>
> You can reach the person managing the list at
> people-owner at lists.audioinjector.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of People digest..."
>
>
> Today's Topics:
>
> 1. Re: People Digest, Vol 14, Issue 9 (Tony Henrie)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 20 Mar 2021 17:18:13 -0600
> From: Tony Henrie <tthenrie at yahoo.com>
> To: people at lists.audioinjector.net
> Subject: Re: [AudioI] People Digest, Vol 14, Issue 9
> Message-ID: <DEA9BC7C-84EA-485C-BCF2-69F0F92CA849 at yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thanks for the response.
>
> here is cat /proc/asound/cards:
>
> 0 [audioinjectorpi]: audioinjector-p - audioinjector-pi-soundcard
> audioinjector-pi-soundcard
>
> Here is lsmod:
>
> Module Size Used by
> uinput 20480 0
> fuse 126976 3
> cmac 16384 1
> rfcomm 49152 14
> bnep 20480 2
> 8021q 32768 0
> garp 16384 1 8021q
> stp 16384 1 garp
> llc 16384 2 garp,stp
> hid_logitech_hidpp 40960 0
> snd_soc_wm8731 20480 1
> regmap_spi 16384 1 snd_soc_wm8731
> spidev 20480 0
> joydev 20480 0
> v3d 73728 3
> gpu_sched 45056 1 v3d
> brcmfmac 327680 0
> brcmutil 20480 1 brcmfmac
> snd_soc_audioinjector_pi_soundcard 16384 0
> gpio_keys 20480 0
> raspberrypi_ts 16384 0
> sha256_generic 16384 0
> raspberrypi_hwmon 16384 0
> cfg80211 761856 1 brcmfmac
> i2c_bcm2835 16384 0
> rtl2832_sdr 24576 0
> r820t 28672 1
> rtl2832 20480 1
> i2c_mux 16384 1 rtl2832
> regmap_i2c 16384 2 snd_soc_wm8731,rtl2832
> snd_soc_bcm2835_i2s 16384 2
> spi_bcm2835 20480 0
> dvb_usb_rtl28xxu 28672 1
> pl2303 20480 0
> dvb_usb_v2 28672 1 dvb_usb_rtl28xxu
> usbserial 36864 1 pl2303
> dvb_core 110592 2 dvb_usb_v2,rtl2832
> vc4 253952 3
> sg 28672 0
> bcm2835_codec 36864 0
> hid_logitech_dj 28672 0
> v4l2_mem2mem 36864 1 bcm2835_codec
> cec 49152 1 vc4
> btusb 49152 0
> btrtl 16384 1 btusb
> btintel 24576 1 btusb
> btbcm 16384 1 btusb
> bluetooth 393216 43 btrtl,btintel,bnep,btbcm,rfcomm,btusb
> bcm2835_v4l2 40960 0
> bcm2835_isp 32768 0
> videobuf2_vmalloc 16384 2 rtl2832_sdr,bcm2835_v4l2
> bcm2835_mmal_vchiq 28672 3 bcm2835_isp,bcm2835_codec,bcm2835_v4l2
> videobuf2_dma_contig 20480 2 bcm2835_isp,bcm2835_codec
> videobuf2_memops 16384 2 videobuf2_dma_contig,videobuf2_vmalloc
> videobuf2_v4l2 32768 5 bcm2835_isp,bcm2835_codec,rtl2832_sdr,bcm2835_v4l2,v4l2_mem2mem
> videobuf2_common 61440 6 bcm2835_isp,bcm2835_codec,rtl2832_sdr,bcm2835_v4l2,v4l2_mem2mem,videobuf2_v4l2
> videodev 249856 7 bcm2835_isp,bcm2835_codec,videobuf2_common,rtl2832_sdr,bcm2835_v4l2,v4l2_mem2mem,videobuf2_v4l2
> mc 45056 8 bcm2835_isp,bcm2835_codec,videobuf2_common,videodev,dvb_core,dvb_usb_v2,v4l2_mem2mem,videobuf2_v4l2
> vc_sm_cma 32768 2 bcm2835_isp,bcm2835_mmal_vchiq
> ecdh_generic 16384 2 bluetooth
> ecc 40960 1 ecdh_generic
> rfkill 32768 6 bluetooth,cfg80211
> drm_kms_helper 241664 3 vc4
> drm 520192 10 v3d,vc4,gpu_sched,drm_kms_helper
> rpivid_mem 16384 0
> drm_panel_orientation_quirks 16384 1 drm
> snd_soc_core 225280 4 snd_soc_wm8731,vc4,snd_soc_bcm2835_i2s,snd_soc_audioinjector_pi_soundcard
> snd_compress 20480 1 snd_soc_core
> snd_pcm_dmaengine 16384 1 snd_soc_core
> snd_pcm 106496 9 snd_soc_wm8731,snd_compress,vc4,snd_pcm_dmaengine,snd_soc_bcm2835_i2s,snd_soc_core,snd_soc_audioinjector_pi_soundcard
> snd_timer 32768 1 snd_pcm
> snd 77824 11 snd_soc_wm8731,snd_compress,snd_timer,snd_soc_core,snd_pcm
> syscopyarea 16384 1 drm_kms_helper
> sysfillrect 16384 1 drm_kms_helper
> sysimgblt 16384 1 drm_kms_helper
> w1_gpio 16384 0
> fb_sys_fops 16384 1 drm_kms_helper
> wire 36864 1 w1_gpio
> rpi_backlight 16384 0
> backlight 20480 2 rpi_backlight,drm
> nvmem_rmem 16384 0
> cn 16384 1 wire
> uio_pdrv_genirq 16384 0
> uio 20480 1 uio_pdrv_genirq
> i2c_dev 20480 0
> ip_tables 28672 0
> x_tables 32768 1 ip_tables
> ipv6 495616 46
> pi at rpi4b1:~ $
>
> here is /boot/config.txt:
>
> cat /boot/config.txt
> # For more options and information see
> # http://rpf.io/configtxt
> # Some settings may impact device functionality. See link above for details
>
> # uncomment if you get no picture on HDMI for a default "safe" mode
> #hdmi_safe=1
>
> # uncomment this if your display has a black border of unused pixels visible
> # and your display can output without overscan
> #disable_overscan=1
>
> # uncomment the following to adjust overscan. Use positive numbers if console
> # goes off screen, and negative if there is too much border
> #overscan_left=16
> #overscan_right=16
> #overscan_top=16
> #overscan_bottom=16
>
> # uncomment to force a console size. By default it will be display's size minus
> # overscan.
> #framebuffer_width=1280
> #framebuffer_height=720
>
> # uncomment if hdmi display is not detected and composite is being output
> #hdmi_force_hotplug=1
>
> # uncomment to force a specific HDMI mode (this will force VGA)
> #hdmi_group=1
> #hdmi_mode=1
>
> # uncomment to force a HDMI mode rather than DVI. This can make audio work in
> # DMT (computer monitor) modes
> #hdmi_drive=2
>
> # uncomment to increase signal to HDMI, if you have interference, blanking, or
> # no display
> #config_hdmi_boost=4
>
> # uncomment for composite PAL
> #sdtv_mode=2
>
> #uncomment to overclock the arm. 700 MHz is the default.
> #arm_freq=800
>
> # Uncomment some or all of these to enable the optional hardware interfaces
> dtparam=i2c_arm=on
> #dtparam=i2s=on
> dtparam=spi=on
>
> # Uncomment this to enable the lirc-rpi module
> #dtoverlay=lirc-rpi
>
> # Additional overlays and parameters are documented /boot/overlays/README
>
> # Enable audio (loads snd_bcm2835)
> dtparam=audio=off
> dtoverlay=disable-bt
> disable_splash=1
> dtoverlay=vc4-fkms-v3d
>
> [pi3]
> gpu_mem=256
> max_framebuffers=1
>
> [pi3+]
> gpu_mem=256
> max_framebuffers=1
>
> [pi4]
> max_framebuffers=2
> start_x=1
> enable_uart=1
> dtoverlay=w1-gpio
> # enable the AudioInjector.net sound card
> dtoverlay=audioinjector-wm8731-audio
>
> # enable safe shutdown trigger by gpio
> dtoverlay=gpio-shutdown
>
> Here?s a thought. I recently added the last line to /boot/config.txt - code: < dtoverlay=gpio-shutdown > to allow a soft shutdown of the raspberrypi4 with a trigger on pin 5 (GPIO 3) from the vehicle ignition switch. Is it possible that interferes with the AudioInjector Zero?s connection to the rpi via gpio?
>
> I have uninstalled pulseaudio and uninstalled alsa-common (and others alsa-related) and reinstalled each alternately with no change. I uninstalled pulseaudio and made sure all the proper settings were made in alsamixer, still no sound. It does, in fact, look like the pulseaudio issue, except that without pulseaudio I still get no output.
>
> A related issue is that OpenAuto Pro requires pulseaudio. Without it, I get no audio controls (volume in particular) in OAP. OAP made that change when Raspberrypi.org <http://raspberrypi.org/> went to pulseaudio. If the AI zero will not function with pulseaudio, I may have to find another sound card for my OAP and move my AI zero to another project.
>
> Tony
>
>> On Mar 20, 2021, at 6:00 AM, people-request at lists.audioinjector.net wrote:
>>
>> Send People mailing list submissions to
>> people at lists.audioinjector.net
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://lists.audioinjector.net/mailman/listinfo/people
>> or, via email, send a message with subject or body 'help' to
>> people-request at lists.audioinjector.net
>>
>> You can reach the person managing the list at
>> people-owner at lists.audioinjector.net
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of People digest..."
>>
>>
>> Today's Topics:
>>
>> 1. AudioInjector Zero no longer being recognized by raspberrypi
>> 4 (Tony Henrie)
>> 2. Re: AudioInjector Zero no longer being recognized by
>> raspberrypi 4 (Matt)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Fri, 19 Mar 2021 20:05:39 -0600
>> From: Tony Henrie <tthenrie at yahoo.com>
>> To: people at lists.audioinjector.net
>> Subject: [AudioI] AudioInjector Zero no longer being recognized by
>> raspberrypi 4
>> Message-ID: <6C027A10-7DEF-468B-9E43-304DF546D004 at yahoo.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I just read another very recent thread (02/21/21?) that appears to have the same issue I have.
>>
>> I have a AI zero installed on a raspberrypi4B with OpenAuto Pro installed on Raspbian. I recently re-installed the latest OAP version, starting from scratch, and updated everything, did the AudioInjector shell install and everything was working fine. I just did another update of raspbian - sudo apt update and sudo apt full-upgrade, this evening (03/19/21) and suddenly my soundcard is no longer showing up. Your response to the other email indicated an issue with Pulseaudio. I don?t believe this is the issue (but I may be wrong) because it was working just fine a few days ago (Raspberrypi.org <http://raspberrypi.org/> went to pulseaudio by default some time ago). Now, after the recent update my card doesn?t show up. It is installed correctly. I re-ran the setup script this evening when I discovered my AIZ wasn?t outputting. I can see that my iphone is connected via bluetooth to the rpi and that it is registering sound input, but there is ?no output device?.
>>
>> I am familiar with linux, but not adept. where should I start to debug? Alsamixer indicates "there are no controls for this device? and no sound device shows under ?F6?.
>>
>> Tony Henrie
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <https://lists.audioinjector.net/pipermail/people/attachments/20210319/083159d9/attachment-0001.htm>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Sat, 20 Mar 2021 13:24:44 +1100
>> From: Matt <matt at audioinjector.net>
>> To: people at lists.audioinjector.net
>> Subject: Re: [AudioI] AudioInjector Zero no longer being recognized by
>> raspberrypi 4
>> Message-ID: <2f554ab1-d348-402c-b940-4b307abf5e14 at audioinjector.net>
>> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>>
>> Hi Tony,
>>
>> This certainly sounds like the pulseaudio problem. What does the
>> following command output ?
>>
>> cat /proc/asound/cards
>>
>> Matt
>>
>> On 20/3/21 1:05 pm, Tony Henrie via People wrote:
>>> I just read another very recent thread (02/21/21?) that appears to
>>> have the same issue I have.
>>>
>>> I have a AI zero installed on a raspberrypi4B with OpenAuto Pro
>>> installed on Raspbian. I recently re-installed the latest OAP version,
>>> starting from scratch, and updated everything, did the AudioInjector
>>> shell install and everything was working fine. I just did another
>>> update of raspbian - *sudo apt update*?and *sudo apt full-upgrade,
>>> *this evening (03/19/21)?and suddenly my soundcard is no longer
>>> showing up. Your response to the other email indicated an issue with
>>> Pulseaudio. I don?t believe this is the issue (but I may be wrong)
>>> because it was working just fine a few days ago (Raspberrypi.org
>>> <http://Raspberrypi.org>?went to pulseaudio by default some time ago).
>>> Now, after the recent update my card doesn?t show up. It is installed
>>> correctly. I re-ran the setup script this evening when I discovered my
>>> AIZ wasn?t outputting. I can see that my iphone is connected via
>>> bluetooth to the rpi and that it is registering sound input, but there
>>> is ?no output device?.
>>>
>>> I am familiar with linux, but not adept. where should I start to
>>> debug? Alsamixer indicates "there are no controls for this device? and
>>> no sound device shows under ?F6?.
>>>
>>> Tony Henrie
>>>
>> --
>> Join the community discussion forum :
>> https://lists.audioinjector.net/mailman/listinfo/people
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <https://lists.audioinjector.net/pipermail/people/attachments/20210320/0ab9a7c3/attachment-0001.htm>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>>
>> --
>> People mailing list
>> People at lists.audioinjector.net
>> https://lists.audioinjector.net/mailman/listinfo/people
>>
>>
>> ------------------------------
>>
>> End of People Digest, Vol 14, Issue 9
>> *************************************
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://lists.audioinjector.net/pipermail/people/attachments/20210320/4deae0f2/attachment.htm>
>
> ------------------------------
>
> Subject: Digest Footer
>
>
> --
> People mailing list
> People at lists.audioinjector.net
> https://lists.audioinjector.net/mailman/listinfo/people
>
>
> ------------------------------
>
> End of People Digest, Vol 14, Issue 10
> **************************************
More information about the People
mailing list