To add a toslink input, it would need to operate the I2S clocks - that would require a different hardware topology to the current devices.
I think we should do a new product based on this concept. Would you be using outputs ? If so what type of output would you want ?
Matt
Peter
On Fri, 24 Jul 2020, at 06:37, Matt via People wrote:
Hey Peter,
I would love to be able to do this, however that tollink connector is driven by the codec. They do the I2S to S/PDIF conversion on chip. S/PDIF receiving is more complex then sending because we also need to interrupt the operating system to notify it of a sample rate change.
Perhaps it is a good idea to do a future project with the S/PDIF injection capability.
Matt
On 24/7/20 8:27 am, Peter Heydenrych via People wrote:
Hi all,
I have just ordered an Ultra 2 but now see the Toslink option is an output.
Is there any possible way to add a Toslink input to a Pi + Ultra 2 system?
I'd prefer it if the Toslink output could be converted to an input, but adding another module to the system would be acceptable.
Thanks,
Peter
-- Checkout the community email list : https://lists.audioinjector.net/mailman/listinfo/people
--
People mailing list
-- Checkout the community email list : https://lists.audioinjector.net/mailman/listinfo/people