Here is the 3d model of the rough layout of external interfaceable components on the AudioInjector stereo. I believe it would be most helpful for making cutouts on enclosures. Went through with my calipers and measured everything out, so I hope everything is somewhat close... If anyone wants to double check my measurements, feel free. I have made my final draft of case design and will start printing test fitments tonight. If it works, I will upload the case design to Thingiverse.
Matt, I tried to push the stl to the repo, but I don't have push rights. I will try to make a 2D layout of the board in the future to post there.
Attached: Image of case, STL of board layout

image.png

On Tue, Aug 23, 2022 at 5:04 AM Matt Flax <flatmax@gmail.com> wrote:
Nice case, thanks for sharing with us!

On Tue, 23 Aug 2022, 16:03 Kyle Runge via People, <people@lists.audioinjector.net> wrote:
https://blog.djdoughy.com/2022/08/raspi-eyesy-clone-part-2-case.html
Been using the AudioInjector Stereo as an input for an home brewed Eyesy visual synth. Making a case for it. Measured everything out painstakingly, but still need to print it to see tolerances. Will keep you updated and upload STLs to thingiverse.
-Kyle Runge

--
People mailing list
People@lists.audioinjector.net
https://lists.audioinjector.net/mailman/listinfo/people