Hi Zayyan. 

Sorry to hear. What if you reinstall the drivers? For the device to work it must appear listed with 'aplay -l' and 'aplay -L'

Fausto

sent from a📱

El mar, 14 de mar. de 2023 a la(s) 0:30, Zayyan Masud

<masudzayyan@gmail.com> escribió:

Hello,

It did not fix the issue. I left it powered off overnight. I am using modep from blokaslabs. I use Jack to configure the card. Previously I would hear static through the headphone jack at least. Now there is nothing. It is worth mentioning I am using the headphone jack instead of the RCA.

Regards,

Z

On Mon, Mar 13, 2023 at 9:12 PM Holguin Daniel <cicloide@yahoo.com> wrote:

I had a similar issue with the Octo. Even after rebooting the Rpi.

I was ready to reinstall the drivers.

Instead, I figured it could be something sticky. So I powered the Rpi off. Then after a while powering it on. It worked.

Try it out see if it fixes it.

Fausto

El lunes, 13 de marzo de 2023, 04:45:15 p. m. EDT, Zayyan Masud via People <people@lists.audioinjector.net> escribió:

My input has stopped working on the stereo card, so I dug deeper and found out aplay -l gives this. 

card 2: audioinjectorpi [audioinjector-pi-soundcard], device 0: AudioInjector audio wm8731-hifi-0 [AudioInjector audio wm8731-hifi-0]

  Subdevices: 0/1

  Subdevice #0: subdevice #0

Instead of Subdevices: 1/1 it is 0/1

I am a noob so apologies for the silly Question.

Regards,

Z

--
People mailing list
People@lists.audioinjector.net
https://lists.audioinjector.net/mailman/listinfo/people

--

zayyan

--
People mailing list
People@lists.audioinjector.net
https://lists.audioinjector.net/mailman/listinfo/people