Hi Michael.

I personally had to find the build before it breaks for it to work well.

Check this thread.

https://github.com/Audio-Injector/Octo/issues/14

Imagen integrada

You also need to make sure components are loaded in the right order, otherwise there's a random channel shift on every boot.

Run this on every boot.

sudo modprobe -r snd_soc_audioinjector_octo_soundcard
sudo modprobe -r snd_soc_cs42xx8_i2c
sudo modprobe -r snd_soc_cs42xx8
sudo modprobe snd_soc_cs42xx8
sudo modprobe snd_soc_cs42xx8_i2c
sudo modprobe snd_soc_audioinjector_octo_soundcard

More info about the problem and THE RIGHT SOLUTION can be found in¬†this thread.

Cheers

El miércoles, 20 de diciembre de 2023, 10:21:26 a. m. GMT-5, michael baker via People <people@lists.audioinjector.net> escribió:

Hi, has anyone successfully got a new octo setup working recently?

I'm stuck where a lot of other people seem to be- noise output on all channels.

I've tried following all the fixes suggested in the various github issues threads, older OSes and kernels, using the automatic .deb, then the manual setup instructions, then 3rd party setup instructions. All stall out at noise or without the octo recognized.

I think I read that the on-board clock signal is susceptible to interference (Flatmax advising to make sure the gpio pins are well seated in one of the threads)- is it possible there's a flaw in newer boards?

Maybe there are many happy new customers that of course don't bother posting that everything went as expected, and I'm doing something wrong?

Are there plans to update the install instructions or .deb file?

Is there work or at least plans for work behind the scenes, or is the octo dead?

I'm happy to spend some time troubleshooting, sending logs or whatever, if someone can guide me. I was really excited about the potential of the octo.

thanks

--
People mailing list
People@lists.audioinjector.net
https://lists.audioinjector.net/mailman/listinfo/people