[AudioI] [AudioI - stereo + zero] Issues with Injector Zero
Matt
matt at audioinjector.net
Tue Feb 18 22:51:54 AEDT 2020
On 18/2/20 10:48 pm, Colin Ngu wrote:
> Hi Matt,
>
> with the aplay -l command, I get the following response:
>
> card 0: audioinjectorpi [audioinjector-pi-soundcard], device 0:
> AudioInjector au dio wm8731-hifi-0 []
>
> Subdevices: 1/1
>
> Subdevice #0: subdevice #0
>
>
> with the amixer command, I get these response. The difference is Mono
> playback=Off instead on "On".
>
> Simple mixer control 'Output Mixer HiFi',0
>
> Capabilities: pswitch pswitch-joined
>
> Playback channels: Mono
>
> Mono: Playback [off]
>
>
Yep, the first thing you have to do is toggle that to on. Either using
the alsamixer command and using the UI or using the amixer command line
interface.
>
> On Tue, Feb 18, 2020 at 10:37 AM Matt <matt at audioinjector.net
> <mailto:matt at audioinjector.net>> wrote:
>
> Hi
>
> On 18/2/20 12:16 pm, Colin Ngu via People wrote:
>>
>> Hi,
>>
>> I'm am running Retropie on my pi zero, and I would like to route
>> the sound output using the Audioinjector HAT. But no success so far.
>>
>
> Sounds like fun, I have a MAME arcade hardware breakout from the
> '90s !
>
>
>> I have modified config.txt with following command;
>> dtparam=i2c_arm=on
>>
>> dtparam=i2s=on
>>
>> dtparam=spi=on
>>
>> dtparam=audio=off
>> dtoverlay=audioinjector-wm8731-audio
>>
> Typically the config.txt file only needs the following
> (dtparam=audio=off is probably ok) :
>
> #dtparam=audio=on
>
> dtoverlay=audioinjector-wm8731-audio
>
> To be sure, you can enable i2c and i2s but may not be necessary :
>
> dtparam=i2c_arm=on
> dtparam=i2s=on
>
>
>> In the retropie settings menu, I have set the following;
>>
>> Audio Card: SYSDEFAULT
>>
>> Audio Device: MASTER
>>
>> This is setting that has does not show any error.. But still no
>> sound.
>>
>> I have also tried the hat on raspberry pi4 running on rabian
>> buster. The config.txt file is modified, and Raspbian seems to be
>> able to detect the soundcard. But still not getting any sound.
>>
>
> Ok this is good, indicates it isn't a hardware issue. But we need
> to dig deeper.
>
> For starters, can you run raspbian and do the following ...
>
> Do you see the sound card when you type in :
>
> aplay -l
>
> Have you enabled the mixer appropriately ? Did you set the "Output
> Mixer HiFi" switch to on ? This will allow audio output on the
> sound card. You can use the alsamixer command to toggle it with a
> user interface.
>
> To check, when I type :
>
> amixer
>
> I get the following :
>
> Simple mixer control 'Output Mixer HiFi',0
> Capabilities: pswitch pswitch-joined
> Playback channels: Mono
> Mono: Playback [on]
>
>
>> Would this be hardware issue? How do I confirm it?
>>
>> Thanks in advance
>>
>> Colin
>>
>>
> --
> Checkout the community email list :
> https://lists.audioinjector.net/mailman/listinfo/people
>
>
> --
> People mailing list
> People at lists.audioinjector.net <mailto:People at lists.audioinjector.net>
> https://lists.audioinjector.net/mailman/listinfo/people
>
--
Join the community discussion forum :
https://lists.audioinjector.net/mailman/listinfo/people
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.audioinjector.net/pipermail/people/attachments/20200218/ecb33093/attachment.htm>
More information about the People
mailing list