[AudioI] Toslink input

[Matt]

To add a toslink input, it would need to operate the I2S clocks - that 
would require a different hardware topology to the current devices.

I think we should do a new product based on this concept. Would you be 
using outputs ? If so what type of output would you want ?

Matt

On 24/7/20 8:40 am, Peter Heydenrych via People wrote:
> Thanks for the quick reply, Matt. Would it be possible to add another 
> device to bring in a Toslink signal? Do you know of anything that 
> would be compatible?
>
> Peter
>
>
> On Fri, 24 Jul 2020, at 06:37, Matt via People wrote:
>>
>> Hey Peter,
>>
>> I would love to be able to do this, however that tollink connector is 
>> driven by the codec. They do the I2S to S/PDIF conversion on chip. 
>> S/PDIF receiving is more complex then sending because we also need to 
>> interrupt the operating system to notify it of a sample rate change.
>>
>> Perhaps it is a good idea to do a future project with the S/PDIF 
>> injection capability.
>>
>> Matt
>>
>> On 24/7/20 8:27 am, Peter Heydenrych via People wrote:
>>> Hi all,
>>>
>>> I have just ordered an Ultra 2 but now see the Toslink option is an 
>>> output.
>>> Is there any possible way to add a Toslink input to a Pi + Ultra 2 
>>> system?
>>> I'd prefer it if the Toslink output could be converted to an input, 
>>> but adding another module to the system would be acceptable.
>>>
>>> Thanks,
>>>
>>> Peter
>>>
>>>
>>>
>> -- 
>> Checkout the community email list :
>> https://lists.audioinjector.net/mailman/listinfo/people
>>
>> -- 
>> People mailing list
>> People at lists.audioinjector.net <mailto:People at lists.audioinjector.net>
>> https://lists.audioinjector.net/mailman/listinfo/people
>>
>
>
-- 
Checkout the community email list :
https://lists.audioinjector.net/mailman/listinfo/people

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.audioinjector.net/pipermail/people/attachments/20200724/425c97c7/attachment.htm>