[AudioI] New Stereo - no sound
Jonathan Markevich
jmarkevich at gmail.com
Sun Jan 31 05:03:28 UTC 2021
Sure did, I wasn't super clear but that's what I meant when I said
"script setup" (i.e. installing the deb file). Then I reflashed and
tried the manual setup.
I also made sure to unmute the Output Mixer HiFi channel in alsamixer.
The volume knobs are also up all the way.
I read through all 14 pages of the old forum and didn't find anything
helpful either.
I wondered if Raspbian buster was the problem but stretch gives me
exactly the same response.
> Hi,
>
> Did you follow these instructions:https://github.com/Audio-Injector/stereo-and-zero <https://github.com/Audio-Injector/stereo-and-zero> ?
>
> The above must work before anything else will.
>
> 73,
> Ron / W4MMP
>
> On 1/30/2021 23:13, Jonathan Markevich via People wrote:
>
> >/Thanks Ron, />//>/Unfortunately that doesn't work... it's all in that link I mentioned. />//>/I tried the manual setup and the script setup, but... />//>/- "aplay -l" shows the device - just the audioinjector device... />//>/- "dmesg" shows the driver is loaded />//>/- jack will not work and />//>/- when I kill jack and try "aplay piano2.wav" (for example) I get
> nothing. />//>/I just want to rule out hardware at this point, I've reflashed the OS
> about a dozen times so far (just in the process of flashing raspbian
> stretch just in case)... />//>>/--------------------------------------------------------------- />//>>/Hi, />>//>>/One thing I found early on is that I2S, I2C and the correct overlay is />>/configured. Also the default audio configuration for the RPi must be />>/disabled. Edit the /boot/config.txt and make sure the follow is in />>/that file: />>//>>/dtparam=i2c_arm=on />>/dtparam=i2s=on />>/dtoverlay=audioinjector-wm8731-audio />>/#dtparam=audio=on />>//>>/73, />>/Ron / W4MMP />>//>>/On 1/29/2021 15:54, Jonathan Markevich via People wrote: />>>//>>//>>/I just got a Stereo card today for my 3B+ but it makes no sound
> despite many attempts. I was hoping to get this working with a
> Patchbox OS/MODEP setup but first I want to make sure the card is working./
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.audioinjector.net/pipermail/people/attachments/20210131/c65f4f84/attachment.htm>
More information about the People
mailing list