[AudioI] 4 Channel Output with Octo
Marc Lavallée
marc at hacklava.net
Mon Dec 5 21:23:31 UTC 2022
Hi Zach,
It's possible to use 2 cheap stereo USB module; there's two use cases,
depending if sample accurate synchronization is required:
-sync not required (it should be just fine): with ALSA, use the first
module for the headphones and the other for the speaker and the transducer.
-sync required: with JACK, use the zita-a2j application, but it's a bit
more work (to avoid if possible)... : https://manpages.org/zita-a2j
Marc
Le 2022-11-29 à 13 h 02, Mason, Zach via People a écrit :
>
> Hi all,
>
> I’m attempting to make a Pi project which is comprised of a arcade
> machine, with a single button input. It would be a branching audio
> narrative (with visual elements, some fan/wind output, some water
> spray and a arcade coin input potentially). However all these things
> in brackets are perfectly achievable to me. The main issue I have is
> concerning the audio side of things as follows:
>
> From the Pi the branching audio needs to be sent to 4 different channels.
>
> 2 channels for stereo audio to a set of headphones.
> 1 channel for mono audio to a speaker in the cabinet.
> 1 channel for mono audio to a series of tactile transducers.
>
> Each audio device needs to receive different audio at the same time
> (for example ambient sounds plays through speakers, when you put
> headphones a voice is already telling you to press a button and then
> once the button is pressed music plays through headphones, the
> speakers go quiet and the tactile transducers vibrate all simultaneously).
>
> How possible is this? If possible, is the octo soundcard the best
> solution? It seems to be from all my research, but is a USB-audio
> interface more optimal?
>
> Thanks for reading this and any advice you can give,
>
> Zach Mason, PhD Student
>
> Design Research Works
>
> Imagination Lancaster
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.audioinjector.net/pipermail/people/attachments/20221205/894bf937/attachment.htm>
More information about the People
mailing list