[AudioI] help getting ultra 2 to work
Matt
matt at audioinjector.net
Tue May 12 16:15:04 AEST 2020
Yikes ! Mistakes happen.
Ok - it sounds like your i2c lines and that part of the codec are still
working (because you still have comms with the codec).
Where did the smoke come from ?
Matt
On 12/5/20 11:07 am, l t via People wrote:
> Hello,
>
> I just built my ultra 2. Unfortunately, I soldered on a male 40 pin
> adapter the wrong way (long pins on the underside of the board), and
> had a lot of trouble removing it to reverse it. Some pads lifted. I
> was able to re-solder it on the other side, and get the raspberry pi
> to detect the card. When I went to record using the "rec" command, I
> got a sinc error. No matter the value I put in, it would say it was a
> bad parameter for sinc.
>
> Even worse, I thought that this was due to having the 40 pin cable
> backwards on the pi, and when I reversed it, the magic smoke got let
> out. After putting the cable back to how it was the first time, the pi
> still detects the card, but just hangs. It would just say "recording"
> (in audacity) and do nothing. No time would advance.
>
> Is there any way to test the card to see how damaged it is? Thanks for
> your help in advance!
>
> Larry
>
--
Our latest product launching now on Kickstarter :
https://bit.ly/2Qr1557
Checkout the community email list :
https://lists.audioinjector.net/mailman/listinfo/people
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.audioinjector.net/pipermail/people/attachments/20200512/ab75b168/attachment.htm>
More information about the People
mailing list